Water Extraction & Removal — 24/7 Emergency Service

Standing water in your home or business right now? Mr. Restore's IICRC-certified crews arrive with truck-mounted extractors and submersible pumps — day or night, weekends and holidays — backed by our 60-minute arrival guarantee.

Call (877) 631-7576 Now 60-MINUTE ARRIVAL GUARANTEE • 24/7 • DIRECT INSURANCE BILLING

Who does water extraction near me? Mr. Restore provides 24/7 emergency water extraction and removal across DFW, the Amarillo/Texas Panhandle, and the OKC metro. IICRC-certified crews with truck-mounted extractors arrive under a 60-minute guarantee. Emergency extraction costs $500–$3,000 depending on water volume and category, with direct insurance billing. Call (877) 631-7576.

What Water Extraction Includes — And Where It Fits

Water extraction is the physical removal of standing and absorbed water from a property. It is step one of the recovery process — and the step where speed matters most, because every hour water sits, it migrates deeper into flooring, drywall, and framing.

Here's how the three phases fit together:

1. Extraction — removing the bulk water. Submersible pumps handle deep standing water; truck-mounted extractors pull water out of carpet, pad, and hard flooring at hundreds of gallons per hour. Weighted extraction wands compress carpet and pad to force out water that a surface pass leaves behind.

2. Mitigation — stopping ongoing damage. After the bulk water is out, our technicians use moisture meters and thermal imaging to find water hiding inside walls, under flooring, and in insulation, then set structural drying equipment. Drying is verified with psychrometric readings — actual measurements, not guesswork.

3. Restoration — repairing what the water damaged: flooring, drywall, trim, and paint. Full restoration projects typically run $1,200–$12,000 depending on scope.

Some companies only extract and leave. Some only rebuild. Mr. Restore has handled the full sequence — extraction through restoration — since 2008, with IICRC WRT, FSRT, ASD, AMRT, and CDSM certifications on staff and a BBB A+ rating held since 2015. One call, one crew, one accountable company.

Truck-Mounted Extraction vs. a Rented Shop-Vac

The most common mistake we see after a flood: a homeowner spends a weekend with a rented shop-vac, the carpet "feels dry," and two weeks later the pad, subfloor, and wall bases are still saturated. The difference is equipment.

Capability	Rented Shop-Vac	Mr. Restore Truck-Mounted Extractor
Removal rate	A few gallons per minute, with constant stops to empty the tank	Continuous high-volume extraction — water goes straight to the truck, no emptying
Depth reached	Surface water only; cannot compress carpet pad	Weighted extraction wands squeeze water out of carpet and pad down to the subfloor
Hidden moisture	Invisible — no way to detect water inside walls or under flooring	Moisture meters and thermal imaging locate every wet pocket before drying begins
Deep standing water	Impractical beyond an inch or two	Submersible pumps clear flooded basements and deep standing water fast
Drying verification	"Feels dry"	Psychrometric readings confirm materials are actually at dry standard
Contaminated water	Unsafe for Cat 2/Cat 3 water	Certified handling of all three water categories

Bottom line: a shop-vac removes the water you can see. Professional extraction removes the water that causes the real damage — the water you can't see.

Water Extraction by Situation

Flooded Basement Water Removal

Basements collect the deepest standing water and drain the slowest. Our crews stage submersible pumps to move the bulk volume out quickly, then switch to truck-mounted extraction for the residual water on the slab and in any finished flooring. Because basements trap humidity, we follow extraction with metered drying and psychrometric verification — pumping alone is never enough to prevent secondary damage below grade.

Carpet & Pad Extraction

Carpet pad holds water like a sponge — often several times more than the carpet above it. Surface vacuuming misses nearly all of it. We use weighted extraction wands that compress the carpet and pad together, forcing trapped water up into the truck-mounted extractor. In many Category 1 losses, fast professional extraction is what makes the difference between drying carpet in place and tearing it out.

Hardwood Floor Water Removal

Hardwood is the least forgiving flooring in a water loss. Boards absorb moisture through seams and edges, then cup and crown as they swell. Rapid extraction followed by controlled, monitored drying gives wood floors their best chance of being saved. We track moisture content with meters throughout the drying process rather than guessing — because replacing a hardwood floor costs far more than drying one correctly.

Standing Water Removal After a Storm

Storm and flash-flood water is typically Category 2 or Category 3 — it has crossed ground surfaces, landscaping, or streets and carries contaminants. We extract it with appropriate protective protocols, then assess what it touched. If your property took storm water, treat it as an emergency: our emergency water damage restoration team runs 24/7 and arrives under the 60-minute guarantee.

Slab Leak Water Extraction

Slab leaks release water from underneath — it wicks up through the concrete into flooring and wall plates, often unnoticed until floors feel warm or baseboards swell. Extraction here is meter-driven: thermal imaging maps the spread, and we remove water from affected flooring while the leak is addressed. See our dedicated slab leak water damage page for how these losses are handled end to end.

Sewage Water Removal (Category 3)

Do not attempt DIY cleanup of sewage water. Category 3 ("black") water contains raw contaminants and pathogens. Contact with skin, or running it through household vacuums, is a genuine health hazard.

Sewage backups require certified Category 3 protocols: containment, extraction with dedicated equipment, removal of porous materials the water saturated, and disinfection. Mr. Restore crews hold IICRC WRT and related certifications and handle Cat 3 losses to industry standard — call (877) 631-7576 and keep family and pets out of the affected area.

What Does Water Extraction Cost?

Emergency water extraction typically costs $500–$3,000. Three factors drive where your job lands in that range:

Water volume and depth — an inch of water in one room sits at the low end; a flooded basement or whole-floor loss trends toward the top.
Water category — Category 1 (clean supply-line water) is the least expensive. Category 2 (gray water) and Category 3 (sewage/flood water) require protective protocols and disposal steps that add cost.
Affected square footage and materials — more rooms, carpet and pad, or hardwood mean more extraction time and equipment.

If the loss continues into structural drying and repairs, full restoration projects range from $1,200 to $12,000 depending on scope. You'll know the numbers before work begins.

Insurance note: most sudden water losses — burst pipes, appliance failures, water heater ruptures — are covered by homeowners insurance. Mr. Restore bills your carrier directly, documents the loss with moisture readings and photos, and works with your adjuster so you're not fronting the cost or fighting the paperwork alone.

Water Extraction Service Areas

Mr. Restore has been family-owned since 2008 — 18+ years of water emergencies across Texas and Oklahoma, dispatched from four offices so the 60-minute arrival guarantee holds across all three metros.

Dallas–Fort Worth Metroplex

Served from our Lewisville, TX headquarters and our McKinney, TX office. Two DFW locations mean crews on both sides of the Metroplex — Dallas, Fort Worth, Plano, Frisco, Arlington, and the surrounding suburbs — with truck-mounted units ready around the clock.

Amarillo & the Texas Panhandle

Our Amarillo, TX office covers the Panhandle, where freeze-related pipe bursts and fast-moving storms make rapid extraction critical. Same certified crews, same equipment, same 60-minute guarantee.

Oklahoma City Metro

The Bethany, OK office serves the OKC metro — Oklahoma City, Bethany, Yukon, Edmond, Moore, and neighboring communities — with 24/7 emergency water removal and direct insurance billing.

Water Extraction FAQs

Mr. Restore provides 24/7 emergency water extraction throughout the DFW Metroplex, Amarillo and the Texas Panhandle, and the OKC metro, from 4 offices (Lewisville HQ, McKinney, Amarillo, and Bethany, OK). IICRC-certified crews arrive under a 60-minute guarantee with truck-mounted extraction equipment. Call (877) 631-7576 any hour.

Emergency water extraction runs $500–$3,000, driven by water volume, category (clean, gray, or sewage water), and affected square footage. If the job continues into drying and repairs, full restoration ranges $1,200–$12,000. For most DFW, Amarillo, and OKC homeowners, insurance covers sudden water losses — and Mr. Restore bills your carrier directly.

Bulk extraction of a typical residential loss usually takes a few hours once our crew arrives — and in DFW, Amarillo, and OKC we arrive under a 60-minute guarantee. A single flooded room clears faster; a flooded basement with several inches of standing water takes longer. Structural drying afterward typically runs about 3 additional days, verified with psychrometric readings.

A shop-vac can pull surface water at a few gallons per minute, but it cannot compress carpet pad, reach water inside walls, or detect hidden moisture — and it should never be used on gray or sewage water. Across DFW, Amarillo, and OKC, our truck-mounted extractors, weighted wands, and moisture meters remove what a shop-vac leaves behind, which is the water that causes the real damage.

Usually, yes — sudden and accidental losses like burst pipes, appliance failures, and water heater ruptures are covered by most homeowners policies (gradual leaks and unmaintained damage often are not). Mr. Restore bills insurance directly for extraction jobs across DFW, Amarillo, and the OKC metro, and documents your loss with moisture readings and photos so your $500–$3,000 extraction claim is supported.

Immediately — mold can begin developing on wet materials within 24–48 hours, and every hour of standing water pushes moisture deeper into flooring and drywall, raising costs toward the top of the $500–$3,000 extraction range. That's why Mr. Restore runs 24/7 with a 60-minute arrival guarantee across DFW, Amarillo, and OKC. Don't wait until morning.

Water on the Floor Right Now? We're Already Rolling.

Family-owned since 2008. IICRC-certified crews, truck-mounted extraction, direct insurance billing, and a 60-minute arrival guarantee — 24 hours a day across DFW, Amarillo, and the OKC metro. The sooner the water is out, the less it costs you.

Call (877) 631-7576 — 24/7 Emergency Line

Water Extraction Removal